Note :
Keeping
Keep container contents dry, cool, and away from direct sunlight. After using the lid, close the container tightly. The best use time is up to 36 months after the date of production if you have proper storage conditions.
When applying paint, use appropriate ventilation and masks and open doors and windows if possible.
Wash hands after use. Seek medical attention if contact with eyes (after washing or excessive water) and ingestion.
contents
Packing
Quart Cans (1kg)
Gallons (4kg)
NPS 610

Matt oil paint

Matte alkyd NANOPUSH oil paint based on the latest formulation obtained in laboratories equipped with research and quality control complexes of nanopush adhesive and paint factories, using high quality raw materials and modern equipments, exterior and interior painting and building surfaces. Wood, cement, brick and flour are used.
Standards :
Properties, Effects and Benefits :
Application :

Paint on interior and exterior surfaces such as iron, plaster, wood, cement, brick and flour etc.

Using method and dosage :
Clean the surface of any contamination, grease and crust of old paint and wait for it to dry completely. Then appropriate substrates such as sanding, putty and primer paint are applied to the surface. If the surface is damp, it must be cleaned using a brush. Metal surfaces should be free from any discoloration and abrasion.

1. Thinly dilute the NANOPUSH matte alkyd oil paint and apply it on the surface. The amount of thinner mixed with the paint depends on the ambient temperature, the surface area, as well as the coloring device. But under normal coloring conditions, thinner-to-pigment mix is ​​15% -20% by brush, 12% -15% roller and 20% -25% pistol by weight.

2. Apply paint at ambient temperature above 10 ° C, surface temperature 3 ° above dew point and humidity below 80%.

Wash and dry hands with thinner after finishing hands, paint tools, or flooring. Follow the manufacturer’s safety instructions when using the thinner.

All products