(Avoid direct sunlight and avoid frost)
|Physical and chemical profile table|
|Physical state||Slurry – Dough|
|Special Weight||1.3 g / cm3|
|The amount of chlorine||does not have|
|Ability to dissolve||in the water|
|PH||6-6 / 5|
Nano restoration slurry – ready to use
Best insulator and sealant for new and old bondage types without any other materials and high resistance to water.
Nanotechnology (permeability to structural depth)
With high silicon content
Less shrinkage and more elasticity
Create seamless cover
100% insulator and sealant, 100% water seal
No odor and chemical effects and 100% antibacterial
Adhesion ability to a variety of surfaces including cement, ceramic tile, gypsum and iron, galvanized and PVC
High resistance to chemicals and acids (ink, vitex, etc.)
Resistant to cracking and gypsum-resistant
Excellent thermal stability against hot and cold water
Colorfulness with base water colors
As a tile adhesive for repairing broken tiles
Non-toxic, non-flammable and applicable in the vicinity of drinking water
Insulation and sealing of new types of bonding
Insulation and sealing of old bondings and extinguishing materials without the need for any other materials and water
Cut the head of the nozzle and apply it to the bundles, flatten it with a tool (knuckle and …) or with a fingernail. For subsequent use, be sure to close the nozzle cover.
– At 6 to 12 hours, the initial resistance and 12 to 24 hours reach their ultimate resistance.
Depending on the depth, size, and length and width of the intake amount varies
Width 10 and Depth 10 = 6 ml
The temperature is then below 75 ° C to + 350 ° C and is environmentally friendly. In contrast, detergent and UV rays and CO2 gas are highly resistant. Antioxidants, algae and bacteria and do not allow the growth and accumulation of these substances at the surface.